Embedded Files
Articles in journals
Srivastava, V. C., Mandal, R.K., Ramachandra, C., Chatterjee, B. and Ojha, S.N (1999): Microstructural and Wear Characteristics of a Hypereutectic Al-Si Alloy Produced by Spray Deposition. Transactions of Indian Institute of Metals 51(1), 29-40.
Srivastava, V.C. and Ojha S.N. (1999): Materials Processing Via Atomisation and Deposition of Melts ( A Review Article). Metals, Materials and processes 11(1), 49-60.
Srivastava, V.C., Upadhyaya, A. and Ojha S.N. (2000): Microstructural Features Induced by Spray Forming of a Ternary Pb-Sn-Sb Alloy. Bull. Mater. Sci. 23(2), 73-78. (Retrieve)
Srivastava, V.C, Mandal, R.K. and Ojha S.N. (2001): Microstructural Evolution During Spray Forming of Al-18%Si Alloy. J. Mater. Sci. Letts. 20(1), 27-29. (Retrieve)
Srivastava, V.C., Mandal, R.K. and Ojha S.N. (2001): Microstructure and Mechanical Properties of Al–Si Alloys Produced by Spray Forming Process. Mater. Sci. & Engg. A 304-306, 555-558. (Retrieve)
Srivastava, V.C. and Ojha S.N. (2001): Effect of Process Variables on Particle Size During Gas Atomisation Process. P/M Science & Technology Briefs 3(3), 5-9.
Srivastava, V. C. and Ojha S.N. (2001): Effect of Process Variables on Particle Size Distribution During Gas Atomisation of Pb-20Sn Alloy. Transactions of Indian Institute of Metals 54(5), 185-192.
Srivastava, V.C., Shukla, P. and Ojha S.N. (2001): Microstructural Features Induced During Spray Forming. Journal of Metallurgy and Materials Science 43(2), 77-91.
Srivastava, V.C., Ghosal, P. and Ojha S.N. (2002): Microstructure and Phase Formation in Spray Deposited Al-18Si-5Fe-1.5Cu Alloy. Materials Letters 56, 797-801. (Retrieve)
Srivastava, V.C., Schneider, A., Uhlenwinkel, V., Ojha, S.N. and Bauckhage K. (2004): Age-hardening Characteristics of Cu-2.4Ni-0.6Si Alloy Produced by Spray Forming Process. J. Materials Processing Technology 147 (2), 174-180. (Retrieve)
Mukhopadhyay, N. K., Kurup, V., Srivastava, V. C., Joshi, P. B. and Mandal R. K. (2004): High Energy Ball Milling of Al65Fe15Cu20 Quasicrystalline Alloy. J. Non-Crystalline Solids 334-335C, 52-56. (Retrieve)
Srivastava, V.C., Schneider, A., Uhlenwinkel, V. and Bauckhage K. (2004): Effect of Thermo-mechanical Treatment on Spray Formed Cu-Ni-Si Alloy. Materials Science and Technology 20(7), 839-848. (Retrieve)
Srivastava, V.C., Mandal, R.K. and Ojha S.N. (2004): Evolution of Microstructure During Spray Forming of Al-18%Si Alloy. Mater. Sci. Eng. A 383(1), 14-20. (Retrieve)
Lagutkine, S., Sheikhaliev, S., Uhlenwinke, V., Achelis, L. and Srivastava, V.C. (2004): Atomisation Process for Metal Powder. Mater. Sci. Eng. A 383(1), 1-6. (Retrieve)
Rudrakshi, G.B., Srivastava, V.C. Pathak, J.P. and Ojha S.N. (2004): Spray Forming of Al-Si-Pb Alloys and their Wear Characteristics. Mater. Sci. Eng. A 383(1), 30-38. (Retrieve)
Srivastava, V.C., Schneider, A., Uhlenwinkel, V. and Bauckhage K. (2004): Effect of Porosity and Reinforcement Content on the Electrical Conductivity of Spray Formed 2014-Al alloy+SiCp composites. J. Mater. Sci. 39(22), 6821-6825. (Retrieve)
Srivastava, V. C. and Ojha S. N. (2004): Microstructure and Wear Characteristics of Spray Formed and Hot Extruded Al-Si Alloys. Materials Science & Technology 20, 1632-1638. (Retrieve)
Schneider, A., Srivastava, V.C., Uhlenwinkel, V. and Bauckhage K. (2004): Spray Forming of 2014-Al Alloy Based Composites with SiCp Particulate Injection. Zeitschrift fuer Metallkunde 95(9), 763-768. (Retrieve)
Srivastava, V.C., Schneider, A., Uhlenwinkel, V., Ojha, S.N. and Bauckhage K. (2005): Microstructural Characteristics of Spray Formed Al-SiCP Composites. Trans. Ind. Inst. Metals 58(1), 91-102. (Retrieve)
Sinha, I., De, P.K. and Srivastava, V.C. (2005): Mechanical working of 2124 Al alloy - SiCp cast composites. J. Materials Science 40, 6045-6048. (Retrieve)
Srivastava, V. C. and Ojha, S.N. (2005): Microstructure and Electrical Conductivity of Al-SiCp Composites Produced by Spray Forming Process. Bull. Mater. Sci. 28(2), 125-130. (Retrieve)
Srivastava, V.C., Schneider, A., Uhlenwinkel, V. and Bauckhage K. (2005): Spray Processing of 2014-Al Alloy Based SiCp Particulate Reinforced Composites and Their Property Evaluation. Mater. Sci. Eng. A 412, 19-26. (Retrieve)
Srivastava, A.K., Srivastava, V.C., Gloter, A. and Ojha, S.N. (2006): Synthesis and Microstructural Aspects of Spray Formed and Hot Extruded Al - 18% Si – 5% Fe - 1.5% Cu alloy. Acta Materialia 54 (7), 1741-1748. (Retrieve)
Chuadhury, S.G., Srivastava, V.C. and Ravikumar, B. (2006): Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled Al-Mn alloy. Scripta Materialia 54 (9), 1691-1696. (Retrieve)
Jindal, V., Srivastava, V.C., Das, A. and Ghosh, R.N. (2006): Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters 60(13-14), 1758-1761. (Retrieve)
Srivastava, V.C. and Ojha, S.N. (2006): Effect of Aspiration and Gas-Melt Configuration in Close-Coupled Nozzle on Powder Productivity. Powder Metallurgy 49(3), 213-218. (Retrieve)
Srivastava, V.C. and Sahoo, K.L. (2006): Metallic Foams : Current Status and Future Prospects. IIM Metal News 9(4), 1-6.
Rudrakshi, G.B., Srivastava, V.C. and Ojha S.N. (2007): Microstructural Development in Spray Formed Al-3.5Cu-10Si-20Pb Alloy and its Comparative Wear Behaviour in Different Environmental Conditions. Materials Science and Engineering A 457, 100-108. (Retrieve)
Poddar, P., Srivastava, V.C., De, P.K. and Sahoo, K.L. (2007): Processing and Mechanical Properties of SiC Reinforced Cast Mg matrix Composites by Stir casting Route. Materials Science and Engineering A 460-461, 357-364. (Retrieve)
Jindal, V. and Srivastava, V.C. (2008): Growth of intermetallic layer at roll bonded IF-steel / aluminum interface. Journal of Materials Process. Tech. 195(1-3) 88-93. (Retrieve)
Srivastava, V.C. and Sahoo, K.L. (2007): Processing, stabilization and applications of metallic foams : An art of science. Materials Science-Poland 25(3) 733-753. (Retrieve)
Srinivasan, A., Chowdhury Ghosh, S., Srivastava, V.C., Swaminathan, J., Poddar, P. and De, P. K. (2007): Microstructural and Textural Evolution During Large Strain Hot Rolling (LSR) of Mg AZ31 Alloy. Materials Science and Technology. 23(11) 1313-1320. (Retrieve)
Srivastava, V.C., Mandal, R.K., Ojha, S.N. and Vekateswarlu K. (2007): Microstructural characteristics and mechanical properties of spray formed Al-Si-Fe alloys. Materials Science and Engineering A. 471(1-2) 38-49. (Retrieve)
Srivastava, V.C., Jindal, V., Uhlenwinkel, V. and Bauckhage, K. (2008): Hot deformation behaviour of spray formed 2014 Al + SiC metal matrix composites. Materials Science and Engineering A. 477(1-2) 86-95. (Retrieve)
Jindal, V., Srivastava, V.C., Das, A. and Ghosh, R.N. (2008): Development of IF-steel/Al multilayer composite by Accumulative roll bonding and annealing process. Materials Science and Technology. 24(7) 798-802. (Retrieve)
Srivastava, V.C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W., Mukhopadhyay, N.K., Chowdhury, S.G. (2008): Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschrift für Krystallographie. 223(11-12) 711-715. (Retrieve)
Srivastava, V.C., Surreddi, K.B., Uhlenwinkel, V., Schulz, A., Eckert, J. and Zoch, H.-W. (2009): Formation of nano-crystalline matrix composite during spray forming of Al83La5Y5Ni5Co2 alloy, Metallurgical and Materials Transactions A. 40(2) 450-461. (Retrieve)
Srivastava, V.C., Rudrakshi, G.B., Uhlenwinkel, V. and Ojha, S.N. (2009): Wear characteristics of spray formed Al alloys and their composites. Journal of Materials Science. 44 (9) 2288-2299. (Retrieve)
Jindal, V., Srivastava, V.C. and Uhlenwinkel, V. (2009): On the Role of Liquid Phase Stability and GFA Parameters. Journal of Non-crystalline Solids 355 (28-29) 1552-1555. (Retrieve)
Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Rosenauer, A., Zoch, H.-W. and Eckert, J. (2009): Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures. Trans. Indian Institute of Metals 62 (4-5) 331-335. (Retrieve)
Anil, M., Srivastava, V.C., Ghosh, M.K., and Ojha, S.N. (2010): Influence of tin content on tribological characteristics of spray formed Al-Si alloys. Wear 268 (11-12) 1250-1256. (Retrieve)
Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, Rosenauer, A., J. and Zoch, H.-W. (2010): Microstructure and Mechanical Properties of Partially Amorphous Al85Y8Ni5Co2 Plate Produced by Spray Forming. Materials Science and Engineering A 527 (2010) 2747-2758. (Retrieve)
Surreddi, K.B., Srivastava, V.C., Scudino, S., Sakaliyska, M., Uhlenwinkel, V., Kim, J.S. and Eckert, J.(2010): Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics : Conference series. 40, pp. 012155 (Retrieve)
N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, T.P. Yadav, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert (2011) Mechanical milling of spray-formed single-phase Al-Cu-Fe icosahedral quasicrystal. Philosophical Magazine 91(19-21), 2482-2490. (Retrieve)
Srivastava, V.C., Singh, T., Chowdhury, S.G., Jindal, V. (2012): Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal-Intermetallic Laminate Composite. J. Mater. Eng. Performance, 21(9), 1912-1918. (Retrieve)
Meyer, C., Ellendt, N., Srivastava, V.C., Uhlenwinkel, V. (2012): Cooling conditions for the generation of bulk metallic glasses by droplet deposition. Inter. J. Materials Research, 103 (9), 1090-1095. (Retrieve)
Ali, F., Scudino, S., Liu, G., Srivastava, V.C., Mukhopadhyay, N.K., Khoshkhoo, M.S., Prashanth, K.G., Uhlenwinkel, V., Calin, M., Eckert, J. (2012): Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites. J. Alloys and Compounds, 536S, S130-S133. (Retrieve)
Srivastava, V. C., Poddar, P., Rajinikanth, V., Sahoo, K.L. (2012): Light Metals Research: Legacy and current standing. Science and Culture 78(11-12), 527-531. (Retrieve)
Goudar, D. M., Rudrakshi, G.B., Srivastava, V.C., Raju, K. (2013): Effect of secondary processing on the microstructure and wear behavior of spray formed Al-30Mg2Si-2Cu alloy. Materials and Design 47, 489-496. (Retrieve)
Ravi Kumar, B., Madhukar, A., Srivastava, V.C., Choudhury, S.G. (2013): Chronology of product development at CSIR-NML. Steel Tech. 7(2), 45-51.
Mistry, D., Paswan, D., Sahoo, K.L., Srivastava, V.C. (2013): Development of iron-based closed-cell foams by powder forging and rolling. J. Mater. Eng. Perfor. 22(8), 2201-2209. (Retrieve)
Ali, F., Scudino, S., Gorantla, S.M., Srivastava, V.C., Shahid, H.R., Uhlenwinkel, V., Stoica, M., Vaughan, G., Mukhopadhyay, N.K., Eckert, J. (2013): Mechanically-driven phase transformation in single-phase Al62.5Cu25Fe12.5 quasicrystals: effect of milling intensity. Acta Materialia 61, 3819-3830. (Retrieve)
Srivastava, V. C., Uhlenwinkel, V. (2013): Application Oriented New Materials by Spray Forming. The Banaras Metallurgist 18, 21-29.
Goudar, D. M., Raju, K., Srivastava, V.C., Rudrakshi, G.B. (2013): Effect of Cu and Fe on the wear properties of spray formed Al-28Si alloy. Materials and Design 51, 383-390. (Retrieve)
Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, J., Rosenauer, A., Zoch, H.-W. (2013): Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system. J. Alloys and Compounds 578, 471-480. (Retrieve)
Mukhopadhyay, N.K., Ali, F., Scudino, S., Samadi Khoshkhoo, M., Stoica, M., Srivastava, V.C., Uhlenwinkel, V., Vaughan, G., Suryanarayana, C., Eckert, J. (2013): Inverse Hall-Petch behavior in nanostructured Al62.5Cu25Fe12.5quasicrystals. Applied Physics Letters, 103, 201914. (Retrieve)
Srivastava, V. C., Huttunen-Saarivirta, E., Cui, C., Uhlenwinkel, V., Schulz, A., Mukhopadhyay, N. K. (2014): Bulk synthesis by spray forming of Al-Cu-Fe and Al-Cu-Fe-Sn alloys containing a quasicrystalline phase, J. Alloys and Compounds, 587, 258-268. (Retrieve)
Mukhopadhyay, N.K., Ali, F., Scudino, S., Samadi Khoshkhoo, M., Stoica, M., Srivastava, V. C., Uhlenwinkel, V., Vaughan, G., Suryanarayana, C., Eckert, J. (2014): Inverse Hall-Petch like mechanical behaviour in nanophase Al-Cu-Fe quasicrystals: A new phenomenon, Acta Physica Polonica A, 126(2), 543-548. (Retrieve)
Srivastava, V.C., Ellendt, N., Meyer, C., Uhlenwinkel, V. (2014): Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8), 744-757. (Retrieve)
Jindal, V., Rupa, P. K. P., Mandal, G. K., Srivastava, V. C. (2014): Effect of high temperature severe plastic deformation on microstructure and mechanical properties of IF-Steel. Journal of Materials Engineering and Performance, 23(6), 1954-1958. (Retrieve)
Ali, F., Scudino, Anwar, M., Shahid, H.R., Srivastava, V.C., Uhlenwinkel, V., Stoica, M., Vaughan, G., Eckert, J. (2014): Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. J. Alloys and Compounds, 607, 274-279. (Retrieve)
Basariya, R., Srivastava, V.C., Mukhopadhyay, N.K. (2014): Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminium alloy composites produced by high energy ball milling. Materials and Design, 64, 542-549. (Retrieve)
Basariya, R., Srivastava, V.C., Mukhopadhyay, N.K. (2015): Effect of milling time on structural evolution and mechanical properties of garnet reinforced EN AW6082 nanocomposites. Met. Mater. Trans A , 46(3), 1360-1373. (Retrieve)
Prashanth, K.G., Shakur Shahabi, H., Attar, H., Srivastava, V.C., Ellendt, N., Uhlenwinkel, V., Eckert, J., Scudino, S. (2015): Production of high strength Al 85 Nd 8 Ni 5 Co 2 alloy by selective laser melting. Additive manufacturing, 6, 1-5. (Retrieve)
Mukhopahyay, N. K., Uhlenwinkel, V., Srivastava, V.C.(2015): Synthesis and characterization of bulk Al-Cu-Fe based quasicrystals and composites by spray forming, J. Mater. Eng. Perfor. ,24(6), 2172-2178. (Retrieve)
Basariya, R., Roy, R. K., Pramanick, A. K., Srivastava, V.C., Mukhopadhyay, N.K. (2015): Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Mater. Sci. Eng. , 638, 282-288. (Retrieve)
Goudar, D.M. Srivastava, V.C., Rudrakshi, G.B., Raju, K., Ojha, S.N. (2015): Effect of Tin on the Wear Properties of Spray Formed Al–17Si Alloy. Trans. Indian Institute of Metals, 68(1), 3-7. (Retrieve)
Basariya, R., Srivastava, V.C., Mukhopadhyay, N.K. (2015): Comparative studies on Al-based composite powder reinforced with nano garnet and multi-wall carbon nanotubes. J. Mater. Eng. Perform., 24(11), 4200-4205. (Retrieve)
Basariya, R., Srivastava, V.C., Mukhopadhyay, N.K. (2016): Inverse Hall-Petch relationship in nanocrystalline Al5Fe2 intermetallic produced by ball milling. Philosophical Magazine, 96(23), 2445-2456. (Retrieve)
Mandal, G.K., Rajinikanth, V., Mishra, D., Kumar, S., Misra, S., Srivastava, V.C., Chowdhury, S.G. (2016): Microstructure Evolution during Hot Deformation of a Micro-alloyed Steel. Trans. IIM, 70 (4), pp. 1019-1033. (Retrieve)
Dayanand M Goudar, V. C. Srivastava, G. B. Rudrakshi (2017): Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer, Engineering Journal (Thailand), 21(1), 155-168. (Retrieve)
Mandal, G.K., Kumar, S., Kumar, T., Srivastava, V.C. (2017): Hot deformation behaviour of a Nb-Mo linepipe steel, Transactions IIM, 70(7), 1943-1951. (Retrieve)
Kumar, S., Srivastava, V. C., Mandal, G.K., Pattanayek, S., Sahoo, K. L. (2017): Single-walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire, J. Physical Chemistry C, 121(37), 20468-20480. (Retrieve)
Laxman, M. K., P., Srivastava, V. C., Venkateswarlu, K., Paswan, S., Mahato, B., Das, G., Sivaprasad, K., Gopala Krishna, K. (2017): Corrosion behaviour of ultrafine grained AA2024 aluminum alloy produced by cryorolling, International Journal of Minerals, Metallurgy and Materials, 24(11), 1293-1305. (Retrieve)
Srivastava, V.C., Mandal, G.K., Ciftci, N., Uhlenwinkel, V., Mädler, L. (2017): Processing of high entropy AlCoCr 0.75 Cu 0.5 FeNi alloy by spray forming, Journal of Materials Engineering and Performance. J. Mater. Eng. Performance, 26(12), 5906-5920. (Retrieve)
Ghosh, M., Bansal, G., Chandan, A., Shah, M., Tripathy, S., Premkumar, M., Sahoo, B., Mukherjee, K., Srivastava, V.C., Chowdhury, S.G. (2017): Functionally Driven Steels- A review. Steel Tech., 12(1), 13-36.
Bansal, G.K., Rajinikanth, V., Ghosh, C., Srivastava, V.C., Kundu, S., Chowdhury, S.G. (2018): Microstructure-Property Correlation in Low Si Steel Processed through Quenching and Nonisothermal Partitioning, Met. Mat. Trans. A, 49(8), 3501-3514. (Retrieve)
Naseema, S., Bansal, G, Ghosh, M., Das, G., Srivatsava, V.C., Srinivas Rao, Gopala Krishna, K. (2018): TEM Analysis of Precipitates in a Low Alloy Wear Resistant Steel and Correlating with its Corrosion Behaviour, Adv. Mater. Res., 1148, 75-81. (Retrieve)
Bansal, G.K., Madhukar, A., Chandan, A., Ashok, K., Mandal, G. K., Srivastava, V.C. (2018): On the Intercritical Annealing Parameters and Ensuing Mechanical Properties of Low Carbon Medium Mn Steel, Mater. Sci. Eng. A, 733, 246-256. (Retrieve)
Ashok, K., Mandal, G.K., Murugesan, A.P., Anil Kumar, P., Srivastava, V.C., Humane, M.M. (2018): Investigation on Causes of Defect Formation during Hot Rolling of Steel Blooms. Steel Tech., 12(4), 40-49.
Goudar, D.M., Alavandi, M. R., Khaji, S.H.S., Rudrakshi, G.B., Srivastava, V.C. (2018): Comparative study on wear behavior of as cast and spray cast hypereutectic Al-Si alloy. J. Mech. Behav. Mater., 27 (3-4), 1-11. (Retrieve)
Mandal, G. K., Ashok, K., Das, S.K., Biswas, P., Sundara Bharathy, R., Srivastava, V.C., (2018): Development of stretch flangeable grade steels by Inclusion Engineering Approach. J. Mater. Eng. Perform., 27(11), 5622-5634. (Retrieve)
Mandal, G.K., Das, S., Kumar, T., Ashok, K., Mondal, K., Srivastava, V. C. (2018): Role of precipitates on recrystallization mechanisms of Nb-Mo microalloyed steel. J. Mater. Eng. Perform., 27(12), 6748-6757. (Retrieve)
Kumar, Sunil, Mandal, G.K., Rajinikanth, V., Mishra, S., Chowdhury, S.G., Srivastava, V.C. (2018): Effect of cooling media on microstructure and mechanical properties of Nb/Ti containing microalloyed steel. J. Met. Mat. Sci., 60(1), 1-12.
Bansal, G.K., Pradeep, M., Ghosh, C., Rajinikanth, V., Srivastava, V.C., Bhagat, A.N., Kundu, S. (2019); Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-step Quenching and Partitioning. Metall. Mater. Trans. A Comm., 50, 547-555. (Retrieve)
Bansal, G.K., Srivastava, V.C., Chowdhury, S.G. (2019): Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Mater. Sci. Eng. A, 767, 138416. (Retrieve)
Peter, N., Liebscher, C. H., Jägle, E.A. Dehm, G.; Duarte, M. J., Srivastava, V. C., Uhlenwinkel, V. (2020): Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. J. Alloys and Compounds, 820, 153149. (Retrieve)
Ali, R., Akhtar, M.U., Zahoor, A., Ali, F., Scudino, S., Shahid, R.N., Tariq, N.H., Srivastava, V.C., Uhlenwinkel, V., Hasan, B.A., Eckert, J. (2020): Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Mater. Chem. Phys., 251, 123071. (Retrieve)
Bansal, G.K., Junior, L.P., Ghosh, C., Rajinikanth, V., Tripathy, S., Srivastava, V.C., Bhagat, A.N., Chowdhury, S.G. (2020): Quench Temperature Dependent Phase Transformations during Nonisothermal Partitioning. Met. Mat. Trans. A , 51, 3410-3424. (Retrieve)
Bansal, G.K., Rajinikanth, V., Ghosh, C., Srivastava, V.C., Dutta, M., Chowdhury, S.G. (2020): Effect of Cooling Rate on the Evolution of Microstructure and Mechanical Properties of Nonisothermally Partitioned Steels. Mater. Sci. Eng. A, 788, 139614. (Retrieve)
Bansal, G.K., Jena, P.S.M., Ghosh, C., Srivastava, V.C., Rajinikanth, V., Dutta, M., Chowdhury, S.G. (2020): Quench Temperature Dependent Mechanical Properties during Nonisothermal Partitioning. Met Mat. Trans A., 51(10), 5088-5100. (Retrieve)
Sahoo, B.K., Srivastava, V.C., Mahato, B., Chowdhury, S.G. (2021): Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing, Mater. Sci. Eng. A, 799, 140100. (Retrieve)
Bansal, G. K., Chandan, A.K., Srivastava, V.C., Krishna, K.G., Das, G., Rajkumar, Chowdhury, S. G., Tarafder, S. (2021): An in-situ study on orientation-dependent micro-tensile behaviour of 316L stainless steel printed using selective laser melting. Transactions of Indian National Academy of Engineering, 6, 1005-10015.
Sahoo, B. K., Srivastava, V. C., Chandan, A.K., Chhabra, H. S., Chowdhury, S. G. (2021): Evolution of microstructure and deformation behavior in Al-Ni added medium-Mn steel processed through intercritical / cold rolling and annealing, Mater. Sci. Eng A, 824, 141852. (Retrieve)
Bansal, G.K., Tripathy, S. Chandan, A. K., Rajinikanth, V., Ghosh, C., Srivastava, V. C., Chowdhury, S. G. (2021): Influence of quenching strategy and nonisothermal partitioning on phase transformation and mechanical properties of low alloy steel, Mater. Sci. Eng. A, 826, 141937. (Retrieve)
Sahoo, B. K., Srivastava, V. C., Chandan, A.K., Chowdhury, S. G. (2021): Enhancing the properties of Ni-Al added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science & Engineering A 837 (2022) 142757. (Retrieve)
Dutt, A. K., Bansal, G. K., Tripathy, S., Krishna K. G., Srivastava, V. C., Chowdhury, S. G. (2022): Optimization of selective laser melting (SLM) additive manufacturing process parameters of 316L austenitic stainless steel. Trans. IIM (2022). (Retrieve)
Vikas Shivam, Vadapalli Sanjana, Yagnesh Shadangi, V.C. Srivastava, N.K. Mukhopadhyay (2022): Synthesis of Nanostructured Equiatomic TiCrFeCoNi High-Entropy Alloy by Mechanical Alloying and Conventional Sintering. Transactions PMAI, 47, 51-57.
Shivam, V., Kar, S., Bansal, G.K., Chandan, A. K., Sahoo, B.K., Mandal, G.K., Mukhopadhyay, N.K., Srivastava, V.C. (2023): A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. J. Alloys and Compounds, 952 (2023) 170029. (Retrieve)
Kar, Shubhada, Srivastava, V.C., Mandal, G.K. (2023): Low density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. J. Alloys and Compounds, 963, 171213. (Retrieve)
Kar, Shubhada, Meena, L.K., Srivastava, V.C., Mandal, G.K. (2024): Microstructural, mechanical and corrosion behavior of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co alloys. Transactions IIM, 77, 1299–1311. (Retrieve)
Kumar, Amritesh, Sarma, Ritam, Bag, Swarup, Srivastava, V.C., Kapil, Sajan (2023): Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer. Sci and Tech. Welding and Joining, 28(9). (Retrieve)
Shivam, V., Kar, S., Mandal, G.K., Srivastava, V.C. (2023): Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. J. Alloys and Compounds, 963, 171261. (Retrieve)
Shivam, V., Kar, S., Mandal, G.K., Srivastava, V.C., Mukhopadhyay, N.K. (2024): Microstructural Evolution and Mechanical Properties of Fe-Containing High and Medium Entropy Alloys: Recent Advances and Future Prospects. Trans. IIM 77, 3003–3012. (Retrieve)
Sahoo, B.K., Walunj, M.G., Srivastava, V.C., Pais, R., Pathak, L.C., Mandal, G.K. (2024): Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Trans. IIM, 77, 1343–1353. (Retrieve)
Kar, S., Shivam, V., Srivastava, V.C., Mandal, G.K. (2024): Achieving Exceptional Strength-Ductility Synergy via Nano-precipitation Hardening in a Ni–Fe–Cr–Co–Al Alloy. Metall Mater Trans A 55, 2359–2373. (Retrieve)
Kar, S., Bagui, S., Mahato, B., Srivastava, V.C., Mandal, G.K. (2024): Coarsening Behaviour of γ′ Precipitates in High Fe Containing Ni-Fe-Cr-Based Medium Entropy Alloy. Metall Mater Trans A 55, 2609–2615. (Retrieve)
Das, A., Kumar, A., Bagui, S., Singh, C.V., Halder, N., Vajpai, S., Srivastava, V.C., Mandal, G.K. (2025): Effect of process parameters and orientation on the tensile and low cycle fatigue properties of low-carbon steel builds manufactured by directed energy deposition-gas metal arc process. Weld World 69, 957–971. (Retrieve)
Shivam, V., Kar, S., Mandal, G.K., Mukhopadhyay, N.K., Srivastava, V.C. (2024): Microstructural design opportunities and phase stability in the spray-formed AlCoCr0.75Cu0.5FeNi high entropy alloy. J. of Alloy. and Met. Syst., 8, 100138. (Retrieve)
Kumar, A., Bag, S., Srivastava, V.C. (2025): Role of inter-layer dwell time on residual stress generation of a thin wall structure by directed energy deposition of ferritic steel. Mater. Chem. Phys., 340, 130807. (Retrieve)
Kumar, A., Das, D., Raj, N.D. Bag, S., Srivastava, V.C. (2025): Comparison of Machine Learning Performance for the Prediction of Melting Efficiency and Bead Geometry in wire Arc Additive Manufacturing Process. Archives of Metallurgy and Materials , 70(1), 29-38. (Retrieve)
Kumar, A., Bag, S., Srivastava, V.C. (2025): Bi-directional scanning strategies for residual stress management by tailoring microstructural evolution in directed energy deposition of 9Cr-1Mo steel. Journal of Materials Processing Technology, 341, 118906. (Retrieve)
Kar, S., Shivam, V. Bagui, S., Mahato, B., Srivastava, V.C., Mandal, G.K. (2025): Promising room to high-temperature properties in a novel Ni-Fe-Cr-based medium entropy alloy prepared using commercial-grade materials. J. Alloys and Comp. 1032, 181118. (Retrieve)
Page updated
Google Sites
Report abuse